Behringer PMP4000 and Bose L1 Model 2 w/B2

Portable PA
1

Just purchased the Bose L1 Model 2 w/B2 to replace (and I know some of you will laugh) a pair of 802s and the giant 302 sub with the Bose Crossover. This has been a great work horse system for many years, first for the bands I played in, and for the past few years as a solo DJ. But that stuff is HEAVY so it was time to upgrade.

I have used my powered  Behringer PMP4000 mixer with them all these years and I have to think that there has to be a way (not coming out of the speaker outputs of course) to still be able to use it as my mixing head as it has 16 channels, on board effects and sliders. If any one has any ideas I would sure appreciate it.

Thanks in advance for any help!

2

Use the MAIN 1 output at the upper right of your board.  L would most likely be mono if you don't use the L and R output

3

Thank youfor taking the time to reply- much appreciated!

4

Hey mdlpoker,

Welcome to the forum! Thank you for joining us.

The Behringer PMP4000 has a dedicated 'MONO OUT' port next to the main stereo outputs - I recommend connecting to the L1 Model II using this output. 

5

Thanks! That is what I thought would be better than the main output, but was not sure- appreciate you taking the time to respond!