I'm hoping someone will point out what I'm doing wrong while trying to get my T8S to connect with my iPad 2G via USB.
Hardware:
- T8S -> USB
- iPad 2G with camera adapter connected to 30pin socket
- SM58 mic -> ch.4 of T8S
- Guitar -> ch.3 of T8S (Tak 12 string acoustic or Godin A6)
- Headphones connected to T8S.
On the headphones (through the T8S) I can hear both mic and guitar. I had to turn down the 'phones volume to the bare minimum as it was too loud in my ears.
The mic sound comes through clearly to the iPad (recorded video and Zoom test conference). The guitar is just faint - barely audible.
Ch.3 trim set just below max (no red LED) and volume set just below max. Master volume set at 12. Guitar pre-amp volume set just below max.
I'm pretty sure that I've missed some setting and that's why the guitar (ch.3) is very faint ... but I can't figure out what I'm missing.
I'll be grateful if someone who has done this or knows what to look for, can point me in the right direction.
My objective is to collaborate with another musician via Zoom so I want him to hear what I'm putting out of my mixer. Not sure if this is relevant, but both mic and guitar are hooked up via Xvive's to the T8S.
Firmware is up-to-date on the T8S.
Thanks and stay safe, all.